Managing Glue Overflow in Flexible Printed Circuit Manufacturing

0
5K

Introduction  

Glue overflow in Flexible Printed Circuit (FPC) manufacturing occurs when the adhesive from the overlay flows out during the lamination process, leading to undesirable glue stains on the FPC pads. This issue is often triggered by the rise in temperature during lamination, causing the adhesive to become more fluid. Several factors contribute to glue overflow, and it is essential to address each one specifically to ensure optimal manufacturing quality. Below, we explore the primary causes of glue overflow and provide effective solutions to mitigate this common problem.

Manufacturing Process-Induced Glue Overflow

Glue overflow can be a direct result of issues within the manufacturing process. To prevent this, FPC manufacturers like Gekunflex should implement stringent incoming material inspections. If the adhesive overflow exceeds acceptable limits during sampling, it is crucial to coordinate with suppliers to return or exchange the materials. Failure to control the quality at this stage can make it challenging to manage glue overflow later in the production process.

Environmental Storage Conditions

Improper storage conditions can also lead to glue overflow. FPC manufacturers should invest in specialized refrigeration units to store protective films under optimal conditions. If overlay (CL) adhesives become moist due to inadequate storage, a low-temperature pre-baking process can significantly reduce the occurrence of glue overflow. Additionally, any unused CL should be promptly returned to the cold storage after use to maintain its integrity.

Localized Glue Overflow on Small PADs  

One of the most common quality issues encountered by FPC manufacturers is localized glue overflow around small pads. Adjusting process parameters solely to address this problem can lead to other issues, such as bubbles or insufficient peel strength. Therefore, it is essential to carefully balance and adjust process parameters to minimize glue overflow without compromising other quality aspects.

Operator-Induced Glue Overflow  

Improper handling during the production process can also cause glue overflow. During the pre-lamination alignment process, operators must ensure precise positioning and calibration of alignment fixtures. Increasing the frequency and rigor of alignment checks can prevent misalignment, which is a common cause of glue overflow. Additionally, it is important to maintain a clean working environment by implementing 5Spractices, such as inspecting the overlay for contamination or rough edges before alignment.

Conclusion

Addressing glue overflow in FPC manufacturing requires a comprehensive approach that involves careful inspection of materials, optimal storage conditions, precise process adjustments, and meticulous handling by operators. By implementing these solutions, manufacturers like Gekunflex can significantly reduce the occurrence of glue overflow, ensuring higher quality FPC products and improved production efficiency.

Like
1
ผู้ให้การสนับสนุน
ผู้ให้การสนับสนุน
ค้นหา
ผู้ให้การสนับสนุน
หมวดหมู่
อ่านเพิ่มเติม
อื่นๆ
العالمي
العالمي
โดย Mohmed Nasser 2024-09-22 19:10:25 0 2K
Sports
Kobe 11:籃球鞋史上的經典傳承與創新突破
在籃球鞋的浩瀚宇宙中,科比·布萊恩特(Kobe Bryant)的簽名系列無疑是其中最耀眼的星辰之一。作為科比系列的巔峰之作,Kobe 11...
โดย 尤www1 Zmwww1 2024-10-08 06:28:38 0 2K
Networking
Yeezy系列:從Yeezy Boost 500到Yeezy 700的潮流之旅
Yeezy系列作爲時尚與潮流的代表,始終走在運動鞋設計的前沿。由Kanye...
โดย Chm 123 2024-08-27 07:27:00 1 3K
Art
The Most Haunted Casinos in the World
Betting houses tend to be in addition to areas in play; they are really hubs involved with...
โดย Recicev Recicev 2024-11-20 08:42:44 0 228
อื่นๆ
Supreme Air Force 1:時尚界的經典之作
  在全球鞋履市場上,Supreme Air Force 1無疑是最受追捧的明星之一。這款鞋結合了supreme的街頭風格和Nike Air Force...
โดย King Seven 2024-09-03 03:11:27 0 3K